Ricoh D093 - Attach the Narrow Mylars to the Main Machine

Table (B854)
D093/D094 3-58 SM
9. Clean the rear plate [1] of the table with alcohol.
10. Attach the harness clamp [2].
11. Clamp the power cord [3] to the table ( x 1).
Attach the Narrow Mylars to the Main Machine
1. If the rear cover is attached to the main machine, remove it ( x 2).
1. Use a clean cloth, moistened with a small amount of alcohol, to clean the area around the
rib
.
2. Remove the tape from each end of one of the narrow mylars.
3. Attach one end to the top edge of the cover
.