Ricoh D093 - Wire Cleaner Motor, Wire Cleaner Sensor

Around the Drum
D093/D094 5-34 SM
LPH")
 Scanner motor (
p.5-77 "Scanner Motor")
 Charge corona unit (
p.5-30 "Charge Corona Wire, Grid Wire, Wire Cleaner")
2. Quenching lamp unit [A] ( x 3, x 3)
3. Quenching lamps (x3) [B] (
x all, x 3)
 The quenching lamps are attached to the plate with double-sided tape.
5.3.3 WIRE CLEANER MOTOR, WIRE CLEANER SENSOR
1. Remove the quenching lamp unit ( p.5-33 "Quenching Lamp Unit, Quenching Lamps")
2. Place the quenching lamp unit on a flat surface.