Ricoh D093 - Opening the Roll Feeder and Removing Shipping Material

Roll Feeder (D503/D504)
SM 3-35 D093/D094
Installation
Opening the Roll Feeder and Removing Shipping Material
 The drawer of the roll feeder is locked and cannot be opened until the main machine is
set on top of the roll feeder.
 Do not try to open the drawer of the roll feeder until after you set the main machine on
top of the roll feeder.
1. Open the drawer [1] of the roll feeder.
2. Remove the spring lock plate [2] (
x 2).
3. Remove the roll paper holders [3] and cardboard packing [4].
 Roll Feeder D503 has 2 holders, and Roll Feeder D504 has 4 holders (shown
above).
4. Remove other tape or packing material in the roll feeder.
5. Remove the shipping lock plate [5] ( x 2).