Ricoh D093 - Dip_Sw2;1; SIF (Scanner Interface)

Board LEDS, DIP Switches
D093/D094 7-76 SM
LED Color LED Definition LED State
0: OFF
LED107 GREEN FPGA Net Ver. Distinguishing No. Bit 0:
1: ON:
0: OFF
LED108 RED +3.3 V On: ON
DIP_SW2
SW No. DIP SW Definition Factory Setting Comments
SW2 (4-bit) For debugging OFF Do Not Use
DIP_SW1
SW No. Push-switch
Definition
Factory Setting Comments
SW1 VDB reset - Push to reset VDB
(FPGA).
SIF
The SIF (Scanner Interface) controls and processes the analog-to-digital (AD) conversion of the
image scanned with the CIS.
The following LEDs indicate the status of elements operation on the SIF<0}
LED Color LED Definition LED State
LED 1 GREEN Power supply monitoring +5V input: ON (else OFF)
LED 2 GREEN Power supply monitoring +5V input: ON (else OFF)