Ricoh D093 - Line Type Automatic Judgement DFU; Line Type Judgement Result DFU

SP5-xxx Mode
SM Appendix 2-141 D093/D094
Appendix:
SP Mode
Tables
150
Selection Country DFU
Used only for Embedded RC Gate-M to select a country name. Once the
number/country is selected, the following settings are checked:
 Access point telephone number
 Dial-up user name
 Modem parameters set for the country
[0 to 10/*/1]
*: 0: Japan, 1: USA, 3: UK
0:Japan, 1:USA, 2:Canada, 3:UK, 4:Germany, 5:France, 6:Italy,
7:Netherlands, 8:Belgium, 9:Luxembourg, 10:Spain
151
Line Type Automatic Judgement DFU
Used only for Embedded RC Gate-M to determine whether the dial-up line is
for manual rotary or push-button tone dialing.
 The status of the execution of this SP (dialing in progress, success,
failure) is written to SP5816-152.
 If the check succeeds, the number (dial or push number) written to
SP5816-153 can be used
 If the check succeeds, the number of the carrier line written to
SP816-154 can be used.
152
Line Type Judgement Result DFU
Used only for Embedded RC Gate-M to display the status of the execution of
SP5816-151 identify the type of line.
0 Success
1 Currently dialing
2 Line abnormal
3 Could not confirm external line carrier with automatic detection.
4 Line disconnected
5 Power supply insufficient
6 Line determination not supported