EasyManua.ls Logo

Ricoh D093 - Page 664

Ricoh D093
779 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SP5-xxx Mode
D093/D094 2-142 SM Appendix
7 Error due to fax transmission in progress.
8 Other error
9 Line type identification still in progress. Please wait.
153
Selection Dial/Push DFU
Used only for Embedded RC Gate-M to set the telephone number of the
dial-up access point of the line checked with SP5816-151. If a number is
entered, use that number. If a number is not displayed, use the pre-set value
for that country.
154
Outside Line Outgoing Number DFU
Used only for Embedded RC Gate-M to set the number of the PSTN number
to dial out where Embedded RC Gate-M is used with a PBX system. If a
number is set here, the number will be replaced by the number returned by
the successful execution of SP5816-151.
156
Dial Up User Name DFU
This is the user name for dialing at the access point where Embedded RC
Gate-M is used.
Note: Numbers with spaces or # marks appear enclosed with quotation
marks in the user name.
157
Dial Up Password DFU
This is the password for dialing at the access point where Embedded RC
Gate-M is used.
Note: Numbers with spaces or # marks appear enclosed with quotation
marks in the user name.
161
Local Phone Number DFU
This is the number of the local line where Embedded RC Gate-M is
connected. This is the line used to communicate with the Call Center.

Table of Contents

Related product manuals