Ricoh D093 - Scanner Main Scan Registration; Scanner Sub Scan Magnification; Scanner Sub Scan Registration; SP4-XXX Scanner

Main SP Modes
D093/D094 6-36 SM
SP4-xxx Scanner
4008 Scanner Sub Scan Magnification
Adjusts magnification in the sub scan direction by changing the speed of the main
motor.
[-0.9 to +0.9/0/0.1% step]
4010 Scanner Sub Scan Registration
1 Leading Edge
This SP shifts the leading edge of the scanned image relative to the sub scan
direction.
[-10 to 10/0/ 0.1 mm step]
 A higher setting "+" shifts the image down (opposite the sub scan direction).
 A lower setting "-" shifts the image up (in the same direction as the sub scan
direction).
2 Trailing Edge
This SP shifts the trailing edge of the scanned image relative to the sub scan
direction.
[-10 to 10/0.0/0.1 mm step]
 A higher setting "+" shifts the image down (opposite the sub scan direction).
 A lower setting "-" shifts the image up (in the same direction as the sub scan
direction).
4011 Scanner Main Scan Registration
This SP shifts the scanned image relative to the main scan direction.
[-4 to 4/0.0/0.1 mm]
 A higher setting "+" shifts the image to the right (in the main scan direction).
 A lower setting "-" shifts the image to the left (against the main scan
direction).