Installation of MFP Options
SM 3-71 D093/D094
Installation
3.9 INSTALLATION OF MFP OPTIONS
3.9.1 OVERVIEW
Four slots for boards (A, B, C, D) and two slots for SD cards (1,2 ) are on the controller box.
Each board or SD card must be inserted into its assigned slot. The slot assignments of boards
and SD cards are written on a decal on the controller box cover.
Always touch a grounded surface to discharge static electricity from your hands before
you handle SD cards, printed circuit boards, or memory boards.
MFP Option Board Slot/SD Card Assignments
Slot Option Name
A
IEEE802.11a/g Interface Unit Type J (D377-01, -02), Type K (D377-19)
B
Not used
C
GigaBit Ethernet Type B (D377-21)
D
File Format Converter Type F (D533)
2
Service Slot:
Firmware update
NVRAM data download/upload
To Next Page
Loading...
