SP5-xxx Mode
D093/D094 2-112 SM Appendix
5191
Mode Set DFU
CTL
This SP switches the STR mode off and on. The STR (Suspend to RAM)
feature suspends the CPU controller, peripheral chips, PCI bus, etc. in the
energy save mode (only the IC operates in energy save mode). This lowers the
amount of power consumed in the energy save mode and enhances energy
saving, compared to the Engine OFF mode (AOF mode) of the previous
machine.
[0 to 1 / 1 / 1] 1: ON, 0: OFF
5195 Limitless Switch CTL
This SP selects the paper feed mode by switching between "productivity
priority" (0) and "tray priority (1). This SP operates only if the operator has
selected "Auto Paper Select".
[0 to 1 / 0 / 1]
0: Productivity priority. Switches from the current feed tray to the priority tray as
soon as the machine detects the priority tray, even if paper still remains in the
current feed tray.
1: Tray priority. Switches the feed tray only after the paper in the tray current
tray runs out of paper.
5199 Paper Exit After Staple End CTL
This SP determines whether a machine that normally cannot continue to output
paper if staple supply runs can continue to operate.
[0 to 1 / 0 / 1]
0: OFF. Paper cannot exit if no staples are available.
1: ON. Paper can exit with no staples.
To Next Page
Loading...
