Main SP Modes
D093/D094 6-4 SM
1106 Fusing Temperature Display
This SP displays the hot roller and pressure roller temperatures.
1 Hot Roller Temperature
2 Pressure Roller Temperature: Center
3 Pressure Roller Temperature: Edge
1159 Fusing Jam SC Setting
The setting of this SP determines whether the machine issues SC559 after three
successive jams occur in the fusing unit.
[0-1/0/1]
0: Disabled. SC559 not issued after 3 successive jams in the fusing unit.
1: Enabled. SC559 issued after 3 successive jams in the fusing unit. The
operator cannot restore operation of the machine by cycling the machine off/on.
SC559 is a Class "A" SC error. The service technician must restore operation of
the machine.
1911 By-pass Feed Start Timing
Adjusts the time that the operator has to adjust the paper skew manually when
feeding paper manually from the bypass tray..
[1.0 to 8.0/2.0/0.1 sec.]
To Next Page
Loading...
