Main SP Modes
D093/D094 6-2 SM
6.2 MAIN SP MODES
This is a collection of the most commonly used SP codes.
6.2.1 SYSTEM
SP1-xxx Feed
1001 Leading Edge Registration
1 1st Roll
Adjusts the leading edge registration for printing. To move the
image down the page, increase the value.
[-10.0 to +10.0/ 0 /0.1 mm step]
2 2nd Roll
3 Cassette
5 By-pass Feed
1002 Side-to-Side Registration
1 1st Roll Adjusts the side-to-side registration for printing.
[-10.0 to +10.0/ 0 /0.1 mm step]
To move the start position to the right, increase the
value (+).
To move the start position to the left, decrease the
value (–).
Note: If you use paper 914 mm wide, adjust within the
range of ±2 mm. If you set the adjustment outside this
range, part of the image will be cut off.
2 2nd Roll
3 Cassette
5 By-pass Feed
To Next Page
Loading...
