Ricoh D093 - Roll 2 Paper Clutch, Feed Roller

Paper Feed
SM 5-55 D093/D094
Replacement
and
Adjustment
5.6.3 ROLL 2 PAPER CLUTCH, FEED ROLLER
 The procedure is for the B642 only.
1. Open the roll feeder drawer.
2. Remove paper roll 2 (at the rear).
3. Roll 2 feed clutch cover [A] ( x 2)
4. Roll 2 feed clutch [B] (
x 1, x 1)
5. Roll 2 feed rollers [C] (
x 3, x 2)
6. After you replace the roller or the clutch, adjust the cut length with SP 1920-211 and SP
1920-215. (
p.5-103 "Image Adjustment with SP Modes")