Main Machine Installation (D093/D094)
D093/D094 3-8 SM
3.2 MAIN MACHINE INSTALLATION (D093/D094)
Always have this Service Manual with you. The installation procedures are not shipped
with the main machine.
Never turn the main machine off when the main power LED is lit or flashing.
To protect the HDD, always switch the machine off with the operation switch on the
operation panel, wait for the power switch LED to stop flashing, then switch off the
main switch on the side of the machine.
3.2.1 ACCESSORY CHECK
Check the accessories and their quantities against the table below.
No. Description Q’ty
1 Flat Brush (Fusing Unit Guide Spurs) 1
2 Original Output Guides 4
3 Upper Output Stacker (Left) 1
4 Upper Output Stacker (Right) 1
5 Original Tray 1
6 Operating Instructions (-17, -21) 3
7 CD-ROM (-17, -21) 1
8 Studs 2
9 Panel: Logo 1
10 Cloth – Exposure Glass 1
11 Guide Lever 1
12 Operation Panel Anchor Screws 3
13 Operating Instruction Holder 1
14 Cloth Pocket 1
To Next Page
Loading...
