Ricoh D093 - PM Counter Reset

SP7-xxx Data Log
SM Appendix 2-197 D093/D094
Appendix:
SP Mode
Tables
7804 PM Counter Reset CTL
Resets the PM counter. To reset, press [Execute]
7807
SC/Jam Counter Reset CTL
Resets the SC and jam counters. To reset, press [Execute]. This SP does not
reset the jam history counters: SP7507, SP7508.
7826
MF Error Counter Japan Only
CTL
Displays the number of counts requested of the card/key counter.
1 Error Total
A request for the count total failed at power on. This error will occur if the
device is installed but disconnected.
2 Error Staple
The request for a staple count failed at power on. This error will occur if the
device is installed but disconnected.
7827
MF Error Counter Clear CTL
Press [Execute] to reset the values of SP7826 to "0". Japan Only
7832
Self-Diagnosis Result Display CTL
Opens the “Self-Diagnose Result Display" to view details about errors. Use the
keys on in the display to scroll through all the information. If no errors have
occurred, you will see “No Error”.