Ricoh D093 - Gigabit Ethernet Type B (D377-21); Accessories; Installation

Installation of MFP Options
SM 3-85 D093/D094
Installation
3.9.8 GIGABIT ETHERNET TYPE B (D377-21)
Accessories
Check the accessories and their quantities against the table below.
Description Qt'y
1. Gigabit Ethernet Board 1
2. Ferrite Core 1
3. Standard LAN Connector Cap 1
 When the Gigabit Ethernet Board is installed, the standard Ethernet board can no
longer be used. A cap is provided to cover the standard Ethernet connector. This
prevents accidental reconnection of the cable while the Gigabit Ethernet board is
installed in the machine.
 Touch a metal surface to discharge any static electricity from your hands before you
handle the board.
Installation
 Before doing the procedure, turn off the main power switch and unplug the machine
from its power source.
1. Remove the rear cover [1] of the main machine (
x2).