Ricoh D093 - Separation AC Current Adjustment; Separation DC Current Adjustment

SP2-xxx Drum
SM Appendix 2-51 D093/D094
Appendix:
SP Mode
Tables
2402 Separation AC Current Adjustment
Adjusts the separation AC voltage for roll paper and cut sheets.
Note: The AC charge applied to the paper remains constant. The AC voltage
level cannot be switched during application of the transfer voltage. Only the DC
current can be adjusted.
1 Roll Paper
[18 to 466 / 280 / 1 uA step]
2 Cut Paper
2403 Separation DC Current Adjustment
Adjusts the level of the separation DC current applied to separate the paper from
the drum. The separation DC current can be set for plain paper, translucent
paper, and film for the leading edge, trailing edge, and areas outside the image.
1 Roll Paper: Plain Paper: Leading Edge
[0.0 to 66/25/0.1 uA]
2 Roll Paper: Plain Paper: Image Area
[0.0 to 66/15/0.1 uA]
3 Roll Paper: Translucent: Image Area
[0.0 to 66/25/0.1 uA]
4 Roll Paper: Translucent: Image Area
[0.0 to 66/15/0.1 uA]
5 Roll Paper: Film: Image Area
[0.0 to 66/25/0.1 uA]
6 Roll Paper: Film: Image Area
[0.0 to 66/15/0.1] uA]