Main SP Modes
D093/D094 6-46 SM
5055
Display IP Address CTL
Switches the banner display of the IP address off and on. (Default: *Off)
[OFF] ON
For example, if this SP is switched on, the IP address will be displayed below
"Ready" while the printer is in standby mode:
Ready
169.254.187.055
5056
Coverage Counter Display CTL
This SP switches the counter list for the system administrator on/off.
[0 to 1/1/1] 0: On, 1: Off
5071
Set Bypass Paper Size Display CTL
This SP determines whether long paper can be fed from the bypass tray.
Note: Even if "1" is selected only paper up to 432 mm can be used.
[0 to 1 / 0 / 1]
0: Disable
1: Enable
5113 Optional Counter Type CTL
1
Default Optional Counter Type
[0 to 12/0/1]
Selects the type of counter:
0: None
1: Key Card (RK3, 4) Japan Only
2: Key Card Down
3: Pre-paid Card
4: Coin Rack
5: MF Key Card
11: Exp Key Card (Add)
12: Exp Key Card (Deduct)
To Next Page
Loading...
