SP5-xxx Mode
D093/D094 2-108 SM Appendix
5055
Display IP Address CTL
Switches the banner display of the IP address off and on. (Default: *Off)
[OFF] ON
For example, if this SP is switched on, the IP address will be displayed below
"Ready" while the printer is in standby mode:
Ready
169.254.187.055
5056
Coverage Counter Display CTL
This SP switches the counter list for the system administrator on/off.
[0 to 1/0/1]
0: On
1: Off
5071
Set Bypass Paper Size Display CTL
This SP determines whether long paper can be fed from the bypass tray.
Note: Even if "1" is selected only paper up to 432 mm can be used.
[0 to 1 / 0 / 1]
0: Disable
1: Enable
5101 Panel Off Level
This SP sets the level of the low power mode, where the operation panel will
switch off after the machine enters low power mode.
[0 to 3/3/1]
0: 195 degrees
1: 180 degrees
2: 170 degrees
3: 155 degrees
To Next Page
Loading...
