SP5-xxx Mode
SM Appendix 2-111 D093/D094
Appendix:
SP Mode
Tables
5162 App. Switch Method CTL
Determines if the application screen changes with a hardware switch or a
software switch.
[0 to 1/0/1]
0: Soft Key Set
1: Hard Key Set
5169 CE Login CTL
This SP enables and disables the CE log in mode. With this SP enabled, the
machine is in the CE (Customer Engineer/Service Technician) login mode.
In the CE login mode:
The machine power can be turned off and on in the SP mode, and it will
remain in the SP mode after power is restored.
This SP is automatically reset to "0" (disabled) after the service technician
closes the SP mode with the [Exit] soft button or after the log out timer
expires.
Note: The Auto Logout Timer is in the "System Settings" of User Tools.
[0 to 1/0/1]
0: Disable, 1: Enable
0: CE login mode disabled.
1: CE login mode enabled.
5180
Charge Counter Method Japan Only
CTL
This SP codes sets the charge counter method.
[0 to 1/0/1]
0: Count number of sheets by paper size
1: Count frequency by paper size
5188
Copy NV Version DFU
CTL
This SP displays the NVRAM version to determine whether the NVRAM has
been initialized. Used during debugging.
To Next Page
Loading...
