SP5-xxx Mode
SM Appendix 2-187 D093/D094
Appendix:
SP Mode
Tables
5907
Plug & Play Maker/Model Name CTL
Selects the brand name and the production name for Windows Plug & Play.
This information is stored in the NVRAM. If the NVRAM is defective, these
names should be registered again.
After selecting, press the “Original Type” key and “#” key at the same time.
When the setting is completed, the beeper sounds five times.
5913 Switchover Permission Time
Sets the length of time to elapse before allowing another application to take
control of the display when the application currently controlling the display is
not operating because a key has not been pressed.
[3 to 30/3/1 s]
5967 Copy Server: Set Function CTL
Disables and enables the document server. This is a security measure that
prevents image data from being left in the temporary file sector of the HDD.
After changing this setting, switch the main switch off and on to enable the new
setting.
[0 to 1/0/1]
0: Enable
1: Disable
5974 Cherry Server CTL
Selects which version of the Scan Router application program, “Light” or
“Full (Professional)”, is installed.
[0 to 1 / 0 / 1 /step]
0: Light version (supplied with this machine)
1: Full version (optional)
To Next Page
Loading...
