SP5-xxx Mode
D093/D094 2-188 SM Appendix
5985 Device Setting CTL
The NIC and USB support features are built into the CTL controller. Use this
SP to enable and disable these features. In order to use the NIC and USB
functions built into the controller board, these SP's must be set to "1".
[0 to 2/0/1]
0: Disable 1: Enable 2: Enable for @Remote
1 On Board NIC
2 On Board USB
5990 SP Print Mode (SMC Printout) CTL
1 All (Data List)
Prints all of the system parameter lists for the
item selected.
Input the number for the item that you want to
print, and then press [1]: “Execute” on the
touch panel.
2 SP (Mode Data List)
3 User Program
4 Logging Data
5 Diagnostic Report
6 Non-Default
7 NIB Summary
8 Capture Log
21 Copier User Program
22 Scanner SP
23 Scanner User Program
24 SDK/J Summary
25 SDK/J Application Info.
To Next Page
Loading...
