Main SP Modes
SM 6-75 D093/D094
System
Maintenance
Reference
5828 Network Setting CTL
50 1284 Compatibility (Centro)
Enables and disables bi-directional communication on the parallel connection
between the machine and a computer.
[0 to 1 / 1 / 1 ]
0:Off, 1: On
52 ECP (Centro)
Disables and enables the ECP feature (1284 Mode) for data transfer.
[0 to 1 / 1 / 1]
0: Disabled, 1: Enabled
65 Job Spool
Switches job spooling on and off.
[0 to 1/0/1]
0: No spooling 1: Spooling enabled
66 Job Spool Clear: Start Time
This SP determines whether the job interrupted at power off is resumed at the
next power on. This SP operates only when SP5828065 is set to 1.
[0 to 1/1/1]
1: Resumes printing spooled jog.
0: Clears spooled job.
69 Spooling (Protocol)
This SP 8etermines whether job spooling is enabled or disabled for each pro to
col. This is a 8-bit setting.
0 LPR 4 BMLinks (Japan Only)
1
FTP
(Not
Used)
5
DIPRINT
2 IPP 6 Reserved (Not Used)
3 SMB 7 Reserved (Not Used)
To Next Page
Loading...
