Ricoh D093 - Pressure Roller Thermistors

Fusing
D093/D094 5-66 SM
5.7.4 PRESSURE ROLLER THERMISTORS
1. Remove:
 Rear cover (
p.5-3 "Rear Cover, Controller Cover")
 Paper exit unit (
p.5-4 "Paper Exit Unit")
2. Remove pressure roller thermistors [A] (
x 1, x 2, x1).
 The end roller thermistor is at
.
 The center roller thermistor is at
.
 You must first remove the stripper unit [B] in order to remove the center thermistor
.