Ricoh D093 - Display ID of FGPA; Gray Balance Adj DFU; Gray Balance Target Value DFU

SP4-xxx Scanner
D093/D094 2-82 SM Appendix
4700 Display ID of FGPA
This SP displays an 8-bit string that displays the ID of the FPGA (Volans) on the
SIB.
4705
Gray Balance Adj DFU
Adjusted before the machine leaves the factory.
4706
Gray Balance Adj DFU
1 Start
Starts the grayscale balance adjustment after it was done at the factory.
4 Start
Confirms the results of the grayscale balance adjustment after it was done at the
factory.
4707
Gray Balance Target Value DFU
These SP codes set the target grayscale values for three colors (RGB)
1
R
[0 to 255 / 176 / 1]
2
G
[0 to 255 / 174 / 1]
3
B
[0 to 255 / 169 / 1]