Ricoh D093 - Line Type Judgment Result DFU; Outside Line Outgoing Number DFU; Selection Dial;Push DFU

Main SP Modes
D093/D094 6-68 SM
152
Line Type Judgment Result DFU
Used only for Embedded RC Gate-M to display the status of the execution of
SP5816-151 identify the type of line.
0 Success
1 Currently dialing
2 Line abnormal
3 Could not confirm external line carrier with automatic detection.
4 Line disconnected
5 Power supply insufficient
6 Line determination not supported
7 Error due to fax transmission in progress.
8 Other error
9 Line type identification still in progress. Please wait.
153
Selection Dial/Push DFU
Used only for Embedded RC Gate-M to set the telephone number of the
dial-up access point of the line checked with SP5816-151. If a number is
entered, use that number. If a number is not displayed, use the pre-set value
for that country.
154
Outside Line Outgoing Number DFU
Used only for Embedded RC Gate-M to set the number of the PSTN number
to dial out where Embedded RC Gate-M is used with a PBX system. If a
number is set here, the number will be replaced by the number returned by
the successful execution of SP5816-151.