Ricoh D093 - Paper Set Sensor, Registration Sensor; Toner Supply Clutch

Development
D093/D094 5-44 SM
5.4.3 PAPER SET SENSOR, REGISTRATION SENSOR
1. Idle registration roller panel ( p.5-9 "Idle Registration Roller Panel")
2. Sensor bracket [A] (
x 1)
3. Paper set sensor [B] (
x 1)
4. Registration sensor [C] (
x 1)
5.4.4 TONER SUPPLY CLUTCH
1. Remove the development unit (
p.5-40 "Development Unit")
2. Plate [A] (
x 1, x 1)
3. Cut the harness clamp [B].
4. Toner supply clutch [C] (
x 1)
 The stopper is spring-loaded and will come out suddenly after you remove the
e-ring.