Ricoh D093 - Original Jam Det

Main SP Modes
D093/D094 6-100 SM
7505
Original Jam Det CTL
Displays the total number of original jams by location. These jams occur
when the original does not activate the sensors.
Display range: 0000 to 9999
Note:
A “Check In” failure occurs when the paper fails to activate the sensor at the
precise time.
A “Check Out” failure occurs when the paper remains at the sensor for longer
than the prescribed time and causes a jam.
The 3rd column in the table below tells you the correct component name
used in the service manual.
Operation Panel Display
1 Org at Power On
2 Org Reg Sn: Not On
3 Org Reg Sn/Exit Sn: Both Off
4 Org Reg Sn: Not Off
5 Org Exit Sn: Not Off
6 Org Stop
7 Org Exit Sn: Not On
8 Org Interval Error