Ricoh D093 - Transfer Corona, Separation Corona Wires; Disassembling the Transfer Unit

Around the Drum
D093/D094 5-38 SM
5.3.5 TRANSFER CORONA, SEPARATION CORONA WIRES
1. Open the upper unit.
2. Side covers (
p.5-2 "Side Covers")
3. Transfer unit [A] (
x 2, x 2)
Reinstallation
 At each end of the unit, make sure that the tabs [B] are fully engaged with the studs [C].
 When the tabs are engaged correctly, the caps on the end are fully level.
Disassembling the Transfer Unit
1. Left cap [A] (
x1)
2. Right cap [B] (
x1)