Around the Drum
SM 5-39 D093/D094
Replacement
and
Adjustment
To remove a paper guide, lift it a small distance and move it in the direction of the
center. Make a note of the position of each guide. Each guide must be installed at
its original position.
3. Paper guides [C] (x4)
4. Transfer wire [D]
5. Separation wires [E]
Reinstallation
Each paper guide pair must be installed at its original position.
For each pair, the high guide is set on the outer side and the low guide is set on the inner
side.
If each guide is not installed at its original position, this will cause paper to wrinkle.
To Next Page
Loading...
