Main Machine Installation (D093/D094)
D093/D094 3-28 SM
4. Do a test print to confirm that the paper exits the main machine straightly and smoothly
between the guide plates.
Copy Check
Scan an original to confirm that the main machine operates correctly.
1. Set an original or test pattern face down on the original feed tray.
2. After about 1 second, the main machine pulls the original, stops for 1 second, then starts to
feed it.
3. Do a sample copy from the roller feeder and paper cassette if these options are installed.
4. If the copied image is not in the correct position, do SP4417 Pattern 28. For instructions on
leading edge and side-to-side adjustments, see SP Adjustments.
Paper Roll Adjustments
SP No. Name Comment
1001-1 Leading Edge Registration – 1st Roll D503/D504
1001-2 Leading Edge Registration – 2nd Roll D504
1002-1 Side-to-Side Registration – 1st Roll D503/D504
1002-2 Side-to-Side Registration – 2nd Roll D504
To Next Page
Loading...
