Table (B854)
D093/D094 3-60 SM
Attaching the Stopper Brackets
This stopper bracket is only for machines in North America that use inch paper sizes.
1. Remove the stoppers [1] (
x 2 ea.).
2. Use a clean cloth soaked in alcohol to clean the surfaces [2] where the stopper brackets [3]
will be attached.
3. Remove the double-sided tape [4] from the rear of each bracket.
4. Install each bracket and stopper on the arms.
5. Lock each stopper in the correct position (
x 2 ea.).
To Next Page
Loading...
