Ricoh D093 - NVRAM Data Download; NVRAM Data Upload; Remote Service Address

Main SP Modes
D093/D094 6-74 SM
-2397 Incorrect ID2 format
-2398 Incorrect request number format
209 Instl Clear
Releases a machine from its embedded RCG setup.
250 CommLog Print
Prints the communication log.
5821 Remote Service Address CTL
This SP sets the IP address for RCG (Remote Communication Gate) for
processing calls to the @Remote service center.
5824
NVRAM Data Upload CTL
Uploads the UP and SP mode data (except for counters and the serial
number) from NVRAM on the control board to an SD card inserted in Slot 2.
 Remove the SD card slot cover on the back of the machine.
 Insert a blank SD card in Slot 2.
 Open this SP and touch [EXECUTE].
 When you see "Completed", remove the SD card from Slot 2.
5825
NVRAM Data Download CTL
Downloads the content of an SD card in Slot 2 to the NVRAM on the control
board.
 Remove the SD card slot cover on the back of the machine.
 Insert a blank SD card in Slot 2.
 Open this SP and touch [EXECUTE].
 When you see "Completed", remove the SD card from Slot 2.