Main SP Modes
SM 6-107 D093/D094
System
Maintenance
Reference
005 Bit Switch 5 Settings 0 1
bit 0
Show "Collate Type", "Staple Type" and
"Punch Type" buttons on the operation
panel.
Disabled Enabled
If enabled, users will be able to configure a Collate Type, Staple Type, and
Punch Type from the operation panel. The available types will depend on
the device and configured options. After enabling the function, the settings
will appear under:
"User Tools > Printer Features > System"
bit 1
DFU
bit 2
If enabled, SDK applications will not be able to alter print data. This is
achieved by preventing SDK applications from accessing a module called
the "GPS Filter".
Note: The main purpose of this bit switch is for troubleshooting the effects
of SDK applications on data.
bit 3
[PS] PS
Criteria
Pattern3 Pattern1
Changes the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern 3: Includes most PS commands.
Pattern 1: A small number of PS tags and headers
bit 4
Increase
max
number
of the
stored
jobs to
1000
jobs.
Disable (100)
Enable
(1000)
If enabled, changes the maximum number of jobs that can be stored on
the HDD (via Job Type settings) to 1000. The default is 100.
To Next Page
Loading...
