Ricoh D093 - Page 131

Paper Cassette (B853)
SM 3-53 D093/D094
Installation
flanges of the cassette unit. Then, attach the cassette unit ( x 4).
8. From the front, remove the board cover [1] (
x 2).
9. Connect the paper-cassette-unit connectors [2] (
x 2) to the roll feeder.
10. From the front, attach the harness clamps
, , , ,
11. Route the connector cable through the open clamps, then close the clamps (
x6).
12. Reattach the board cover, front cover, and rear plate of the roll feeder.
13. Reinstall the paper rolls, and close the drawer of the roll feeder.
14. Put the paper cassette in the paper cassette unit.
15. Set the Paper Size and Type for the Paper Cassette
 Push [User Tools]> “System Settings”> “Tray Paper Settings”> “Tray Paper Size: Tray
3”
 Select the paper size for the paper cassette> [OK].
 Push “Next”> “Paper Type: Tray 3”
 Select the paper type for the paper cassette.