SM iii D093/D094
Roll Feeder, Table Accessories ......................................................... 3-27
Copy Check ........................................................................................ 3-28
3.2.4 ANTI-CONDENSATION HEATER .................................................. 3-29
Before You Begin… ........................................................................... 3-29
3.2.5 MOVING THE MACHINE ................................................................ 3-30
3.3ORIGINAL HANGER (D311) .................................................................... 3-31
3.3.1 ACCESSORY CHECK .................................................................... 3-31
3.3.2 INSTALLATION .............................................................................. 3-31
3.4ROLL FEEDER (D503/D504) ................................................................... 3-32
3.4.1 ACCESSORY CHECK .................................................................... 3-32
3.4.2 ROLL FEEDER INSTALLATION PROCEDURE ............................. 3-34
Setting the Main Machine on the Roll Feeder .................................... 3-34
Opening the Roll Feeder and Removing Shipping Material ................ 3-35
Leveling the Main Machine and Attaching Leg Covers ...................... 3-40
Connecting the Main Machine and Roll Feeder ................................. 3-42
Attaching the Narrow Mylars to the Main Machine ............................. 3-44
Attaching the Wide Mylars to the Back of the Roll Feeder ................. 3-45
Securing the Power Cord ................................................................... 3-46
Installing the Paper Rolls .................................................................... 3-47
Attaching the Lower Output Tray, Exit Guide Plates .......................... 3-47
Entering the Cut Length Adjustment .................................................. 3-49
Setting Paper Sizes/Types for the Tray 1 (1st Roll), Tray 2 (2nd Roll) 3-49
Cutter Caution Decal .......................................................................... 3-50
3.5PAPER CASSETTE (B853) ..................................................................... 3-51
3.5.1 ACCESSORY CHECK .................................................................... 3-51
3.5.2 PAPER CASSETTE INSTALLATION PROCEDURE ...................... 3-52
3.6TABLE (B854) .......................................................................................... 3-54
3.6.1 ACCESSORY CHECK .................................................................... 3-54
3.6.2 INSTALLATION PROCEDURE ...................................................... 3-55
Setting the Main Machine on the Table .............................................. 3-55
Leveling the Main Machine and Attaching Leg Covers ...................... 3-56
Attaching the Guide Plate ................................................................... 3-56
Connecting the Main Machine and Table ........................................... 3-57
Attach the Narrow Mylars to the Main Machine .................................. 3-58
Attach the Wide Mylars to the Back of the Table ................................ 3-59
Attaching the Stopper Brackets .......................................................... 3-60
Table Accessories .............................................................................. 3-61
To Next Page
Loading...
