Installation of MFP Options
D093/D094 3-80 SM
6. Insert the expansion memory [1], then re-assemble the machine.
7. Remove the SD card slot cover (
x1).
8. Insert the application SD card into Slot 1.
9. Reattach the SD card slot cover (
x1).
10. On the operation panel, remove the dummy keytop and replace it with the "Scanner"
keytop.
11. Reconnect the machine to its power source and turn the main power switch on.
12. Enter the SP mode and make sure that SP5985-1 and SP5985-2 are both set to "1"
(enabled).
13. Turn the machine power off/on.
14. Print a Configuration Page to make sure that the machine recognizes the installed option:
User Tools> Printer Features> List/Test Print> Configuration Page
To Next Page
Loading...
