Scanner
SM 5-21 D093/D094
Replacement
and
Adjustment
2. At the front, disconnect the ground wires:
[A] Left (
x1)
[B] Center (
x1)
[C] Right (
x1)
3. Disconnect the CIS from the SIF (
x5).
1. Remove the original exit sensor [A] (
x1, x2, x1)
2. Remove the CIS unit [B] (
x4).
3. Remove the three brackets [C] (
x3)
The three brackets must be removed and re-attached to the new CIS unit. These
brackets are not provided with a new CIS unit.
To Next Page
Loading...
