Scanner
SM 5-29 D093/D094
Replacement
and
Adjustment
3. Use a soft point (not sharp!) to press
in the upper left corner.
4. Press the
in the lower left corner after it appears.
5. Touch a few random spots on the touch screen to confirm that the marker (+) appears
exactly where the screen is touched.
6. If the ( mark does not appear where the screen is touched, push [./* Re-input] and repeat
the procedure.
7. When you are finished, touch "[#] OK" on the screen (or push [#] on the operation panel).
8. Touch [#] Exit on the screen to close the menu and save the settings.
To Next Page
Loading...
