Boards
D093/D094 5-88 SM
6. Open the paper exit guide unit.
7. Remove:
[A] Anti-condensation heater switch bracket (
x2)
[B] Ground wire (
x1)
[C] Left vertical ground plate (
x2)
[D] Right vertical ground plate (
x1, x2)
8. Close the paper exit guide unit.
9. Remove PSU [A] ( x12, x1)
10. Lay the PSU tray on a flat surface.
11. Remove the PSU from the tray (
x9, x1, x2).
To Next Page
Loading...
