Firmware Update
SM 5-123 D093/D094
Replacement
and
Adjustment
After approximately 90 sec. the initial firmware update screen appears.
Only the firmware update applications on the SD card are displayed in the menu. If
more than one update is to be done, the System Copy and Engine updates should
always be done first.
6. Look at the numbers in the right (ROM) and left (NEW) columns.
If the NEW number is higher than the ROM number the application needs to be
updated.
If the numbers are the same, the application does not need to be updated.
7. Press the down arrow to see the next screen.
8. If no application needs to be updated, touch [Exit].
9. To update an application:
Touch the name of the application that needs to be updated. The name of the
application changes to reverse black and the [Update#] key appears at the lower right
corner of the screen.
Touch [Update#] to start the update procedure.
Follow the instructions on the operation panel to complete the procedure.
To Next Page
Loading...
