SP1-xxx Feed
D093/D094 2-16 SM Appendix
107 2nd Roll: 2000mm: Translucent Paper
[-30 to +30/0/1 mm]
108 2nd Roll: 3600mm: Translucent Paper
109 2nd Roll: 6000mm: Translucent Paper
110 2nd Roll: 15000mm: Translucent Paper [-100 to +100/0/ 1 mm]
122 2nd Roll: 297mm: Film
[-10 to +10/0/0.1 mm]
123 2nd Roll: 420mm: Film
124 2nd Roll: 594mm: Film
125 2nd Roll: 841mm: Film
[-20 to +20/0/1 mm]
126 2nd Roll: 1189mm: Film
127 2nd Roll: 2000mm: Film
[-30 to +30/0/1 mm]
128 2nd Roll: 3600mm: Film
129 2nd Roll: 6000mm: Film
130 2nd Roll: 15000mm: Film [-100 to +100/0/ 1 mm]
1923 Paper Interval Adjustment
This SP slightly increases the gap between sheets in the paper path. When the
machine shifts to the CPM down mode, the paper is fed by whichever interval
between sheets is longer, the gap set with this SP or the gap determined by CPM
down.
[0 to 500/0/1 mm]
Note:
The "0" (default) setting does not mean that the gap is eliminated.
When set to "0" the standard gap between sheets is maintained (480 mm for
the D093 and 168 mm for the D094.)
To Next Page
Loading...
