SP2-xxx Drum
SM Appendix 2-63 D093/D094
Appendix:
SP Mode
Tables
2954 Print Image Priority
Sets level for line thickness processing for vertical lines wider than 2-dots. This
SP is provided to adjust the settings if the desired image quality cannot be
obtained with the default settings. However, with the content of some settings
some scratchiness or other problems may occur in the images, so use this
adjustment with caution.
[0 to 3/1/1]
0: Strongest processing (thinnest)
1: Normal processing
2: Weaker processing
3: Weakest processing (thickest)
The illustration above shows how two elements comprise each dot. This example shows
vertical and horizontal 1-dot lines.
The diagram above illustrates the patterns for the settings SP2954-10 (0 to 3) on a 2-dot
vertical line. The settings have no effect on the horizontal line.
To Next Page
Loading...
