SP4-xxx Scanner
D093/D094 2-68 SM Appendix
4011 Scanner Main Scan Registration
This SP shifts the scanned image relative to the main scan direction.
[-4 to 4/0.0/0.1 mm]
A higher setting "+" shifts the image to the right (in the main scan direction).
A lower setting "-" shifts the image to the left (against the main scan
direction).
4012 Scanner Erase Margin
These SP's define borders around the image area output by the scanner. Each
edge can be set independent of the others.
5 DF: LEdge
[0 to 9 / 1.5 /0.1 mm]
6 DF: TEdge
7 DF: Left
8 DF: Right [0 to 9 / 0.5 / 0.1 mm]
4013 Scanner Free Run
These SP's set up and start the scanner free run operation for testing.
1 Start
This SP uses the most recent settings for the original length and interval between
sheets to print virtual pages for a scanner free run.
[ON] Start
[OFF] Stop
2 Page Interval Setting
Sets the interval between virtual prints for the scanner free run.
[0 to 25/ 0.9 /0.1 s]
3 Original Length Setting
Sets the interval between multiple feeds for the DF free run.
[0.2 to 15 / 0.6 /0.1 m]
To Next Page
Loading...
