Overview
SM 2-21 D093/D094
Product
Information
NUMBER NAME DESCRIPTION
Motors
M1 Cassette Feed Motor
This stepper motor controls the paper feed
roller in the paper cassette.
M2 Cooling Fan Motor
This is an exhaust fan for the area around the
drum.
M3 Cutter Motor This controls the cutter in the roll feeder.
M4 Drum Motor This controls the OPC drum.
M5 Fusing Motor
This controls the hot roller, fusing exit rollers,
and upper exit rollers.
M6 Main Motor
This controls the registration roller,
development unit, and the agitator in the toner
cartridge.
M7
PCB Cooling Fan
Motor 1
Cools the SIPU, MCU and controller board.
M8
PCB Cooling Fan
Motor 2
Cools the SIPU, MCU and controller board.
M9 Roll Feed Motor
This controls the feed rollers for roll 1 and roll
2 in the roll feeder.
M10 Scanner Motor
This controls the original feed rollers and
original exit rollers.
M11
Used Toner Bottle
Motor
This controls the mechanism that keeps the
level of used toner in the bottle flat.
M12 Wire Cleaner Motor
This moves the corona wire cleaner to the left
and right to clean the charge corona wire.
To Next Page
Loading...
