SP5-xxx Mode
SM Appendix 2-123 D093/D094
Appendix:
SP Mode
Tables
5505
Error Alarm CTL
Sets the error alarm level.
[0 to 255 / 1 / 1 Step]
Note: 1 Step is 100 m
5507 Supply Alarm CTL
1 Paper Supply Alarm
Switches the control call on/off for the paper supply.
[0 to 1/0/1]
0: Off, 1: On
0: No alarm.
1: Sets the alarm to sound for the specified number transfer sheets for each
paper size (A3, A4, B4, B5, DLT, LG, LT, HLT)
3 Toner Supply Alarm
Switches the control call on/off for the toner end.
[0 to 1/0/1]
0: Off, 1: On
If you select “1” the alarm will sound when the main machine detects toner
end.
80 Toner Call Timing
This SP switches the toner supply call for @Remote.
[0 to 1 / 0 / 1]
0: Toner replacement. Triggers the alarm when toner should be replaced with
new toner.
1: Toner near-end. The alarm triggers at toner-end or toner near-end.
Note: The “Interval nn" SP's below specify the paper control call interval for
the referenced paper sizes.
97 Interval: 841mm
[100 to 10000/300/1 Step]
98 Interval: 594mm
99 Interval: 420mm
To Next Page
Loading...
