SP5-xxx Mode
D093/D094 2-134 SM Appendix
5811
Machine No. Setting DFU
CTL
This SP presents the screen used to enter the 11-digit number of the machine.
The allowed entries are "A" to "Z" and "0" to "9". The setting is done at the
factory, and should not be changed in the field.
5812
Service Tel. No. Setting CTL
Use these SP modes to input service and support telephone numbers. Enter the
number and press
Press the [./*] key to input a pause. Press the “Clear modes” key to delete the
telephone number.
1 Service Service representative telephone number.
2 Facsimile Fax number of service representative
3 Supply Supplier of consumables
4 Operation Operation support
To Next Page
Loading...
