SP5-xxx Mode
SM Appendix 2-139 D093/D094
Appendix:
SP Mode
Tables
68
CERT: Error
Displays a number code that describes the reason for the notification
requesting the certification update.
0 Normal. No request for certification update in progress.
1 Certification update in progress due to expiration of certification.
2 SSL error has been issued after the certification has expired.
3 There has been a shift from a common to individual certification.
4 There has been a common certification without ID2.
5 No certification has been issued.
6 CTL URL does not exist.
69
CERT: Up ID
The ID of the request for certification.
83
Firm Up Status
Displays the status of the firmware update.
85
Firm Up User Check
This SP setting determines if the operator can check the previous version of
the firmware before the firmware update execution. If the option to check the
previous version is selected, a notification is sent to the system manager and
the firmware update is done with the firmware files from the URL.
86
Firmware Size
Allows the service technician to check the size of the firmware data files
during the firmware update execution.
87
CERT: Macro Version
Displays the macro version of the @Remote certification
To Next Page
Loading...
