Ricoh D093 - Page 685

SP5-xxx Mode
SM Appendix 2-163 D093/D094
Appendix:
SP Mode
Tables
5844 USB CTL
1 Transfer Rate
Sets the speed for USB data transmission.
[Full Speed], [Auto Change]
2
Vendor ID DFU
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000 to 0xFFFF/1]
3
Product ID DFU
Sets the product ID.
[0x0000 to 0xFFFF/1]
4
Device Release Number DFU
Sets the device release number of the BCD (binary coded decimal) display.
[0000 to 9999/100/1]
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
5 Fixed USB Port
This SP standardizes for common use the model name and serial number for
USB PnP (Plug & Play). It determines whether the driver requires re-installation.
[0 to 2 / 0 / 4]
0: Off
1: Level 1
2: Level 2
6 PnP Model Name
This SP sets the model name to be used by the USB PnP when "Function
Enable (Level 2) is set so the USB Serial No. can have a common name
(SP5844-5).
Default: Laser Printer (up to 20 characters allowed).