Overview
SM 2-27 D093/D094
Product
Information
NUMBER NAME DESCRIPTION
Solenoids
SOL1
Paper Junction Gate
Solenoid
This controls the paper junction gate in front of
the rear paper exit and below the upper exit.
When closed, paper feeds out at the top.
When open, paper feeds out at the back.
SOL2 Pick-Off Pawl Solenoid
This moves the pick-off pawls until they touch
the drum.
Switches
SW1 Dehumidifier Switch
Switches the dehumidifiers (x4) in the roll
feeder on/off.
SW2 Exit Cover Switch
This detects if the exit cover on the rear of the
machine is closed.
SW3 Main Power Switch This switches the copier on and off.
SW4 Scanner Stop Switch
This is on the operation panel. The user
pushes this to stop original feed if there is a
problem during scanning.
SW5 Scanner Switch
This interlock switch stops power to the
original feed unit when the original feed unit
cover is lifted.
SW6
Toner Hopper Cover
Switch
This detects if the toner supply cover is open
or closed.
SW7 Upper Unit Switch 1
This detects if the upper unit is open on the left
side.
SW8 Upper Unit Switch 2
This detects if the upper unit is open on the
right side.
To Next Page
Loading...
