SP8-xxx Data Log 2
D093/D094 2-208 SM Appendix
8066
L:FIN Jobs [0 to 9999999/ 0 / 1]
These SP's total finishing methods for jobs output from within the document
server mode screen at the operation panel. The finishing method is specified
from the print window within document server mode.
8067
O:FIN Jobs Not Used
[0 to 9999999/ 0 / 1]
These SP's total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by the
application.
806x 1 Sort
Number of jobs started in Sort mode. When a stored copy job is
set for Sort and then stored on the document server, the L:
counter increments. (See SP8066 1)
806x 2 Stack Number of jobs started in Sort mode.
806x 3 Staple Number of jobs started in Staple mode.
806x 4 Booklet
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
806x 5 Z-Fold
Number of jobs started In any mode other than the Booklet mode
and set for folding (Z-fold).
806x 6 Punch
Number of jobs started in Punch mode. When Punch is set for a
print job, the P: counter increments. (See SP8064 6.)
806x 7 Other Reserved. Not used.
Important: Codes 8 to 14 are not used with this machine.
To Next Page
Loading...
